Leaking Unit Curbs Over Offices
Office roofs carry several rooftop units, and cracked curb corners drip straight onto ceiling tiles, desks, and server rooms below them.

As a Valparaiso commercial roof repair contractor, we inspect every roof on a property in one visit and fix the leaks, seams, and drains that need it.
Valparaiso commercial roof repair often means more than one roof: an office, a warehouse, and a maintenance shed on the same lot.
Each building on a property ages on its own clock. One roof needs a single seam patch, the shed next door has rusted laps and loose screws, and the office wing has a drain holding water every time it rains. Treating them as one site saves trips and keeps the records together.
We walk every roof on the property during one visit and hand you one findings list, ranked across all of them, so repair money goes to the roof that needs it first. Moisture readings on each roof show which ones still have years left and which are close to replacement.

Offices and mixed sites carry a mix of roof systems. These are the failures that come up across them.
Office roofs carry several rooftop units, and cracked curb corners drip straight onto ceiling tiles, desks, and server rooms below them.
Leaves from landscaped lots fill strainers each fall, and the next heavy rain backs water over the drain flashing.
Older building wings often carry original membrane whose laps have dried and lifted along the edges.
Metal outbuildings on the same lot lose washers and fasteners years before the main roof shows wear.
Where a newer wing meets an older one, wall flashing pulls apart as the two structures move differently.
Canopy and entry roofs with little slope hold water that seeps under the edge metal into the soffit.
On a site with several roofs, each one gets its own call. These checks decide it building by building.
| Check | Repair This Roof | Plan Replacement For This Roof |
|---|---|---|
| Leak count | One or two leaks with a clear entry | Leaks across most of the building |
| Moisture | Dry readings beyond the repair area | Wet insulation through large sections |
| Surface | Membrane or panels still intact | Cracked membrane or rusted-through panels |
| Age versus neighbors | Newer than the other roofs on site | Oldest roof on the property by a wide gap |
| Drainage | One clogged drain or a single low spot | Water standing across most of the field after storms |
Handling several roofs together changes how the repair budget gets spent.
Findings from every roof land in a single list, ordered by which leak or failing detail matters most.
Grouping seam, drain, and curb repairs across buildings means one mobilization instead of several.
Repairs on the healthier roofs buy time so replacements can be spread over different budget years.
Tenants and staff in each building get one notice and one short work window.
List the buildings and what each roof covers. One visit can inspect them all and group the repairs.
Outside these towns? Call us or send us a message. Each town below has its own repair page.
Lake wind at edge metal and snow at the drains.
Retail strip roofs, repaired around store hours and tenants.
Metal roofs with skylights, ridge caps, and wall flashing.
Older shop roofs with years of patches to sort.
A multi-building visit follows one route across the lot so no roof gets skipped.

Before the visit, we note each building, its roof type, and any leaks the staff already know about.
Every roof gets the same check of drains, seams, curbs, and edges, with moisture readings at suspect spots.
Failures across all buildings are ranked together, so the worst drain or seam on the property comes first.
Approved repairs are grouped by building and finished in one mobilization with matching materials.
Photos and notes come back sorted by building, so each roof keeps its own history for later decisions.
Answers for Valparaiso owners and property managers.
Yes. We repair flat roofs, metal roofs, and industrial roofs in Valparaiso, starting each job by locating where water gets in.
Once the source is found, the membrane, flashing, fasteners, or drain involved gets fixed, and nearby details with the same wear are checked to head off a second leak.
Price follows the roof system, the number of failed areas, how hard the leak is to trace, and how much wet insulation comes out.
On a site with several buildings, grouping repairs into one visit trims the travel and setup share of the bill.
Most roof work is quiet enough to run during the day, and noisy steps such as cutting can be timed for early mornings.
Interior access for leak tracing gets scheduled with your staff so desks and meeting rooms stay usable.
Our repairs run out of Portage, a short drive from Valparaiso, and the visit works the same in both places.
Call or request an estimate with the property address and the roof trouble, and we will set a time to walk it.
One visit handles both. Each roof gets the method that fits it: membrane repairs on the office, fastener and lap work on the shed.
Both show up on the same findings list with their own photos and prices.
Put money first into the roofs with active leaks over people or equipment, then into drains and curbs that are close to failing.
Roofs that are dry and holding come last. The ranked list from the visit shows that order, building by building, with a price on each line.
Canopies have very little slope, so water sits along the edge metal and finds its way into the soffit below.
Resetting the edge, sealing the laps, and adding a little pitch or a better outlet usually stops the drip over the door.

List the buildings on your property and what each roof is doing. We will walk them together and price the repairs.